You have 0 items in your cart.
PCE INSTRUMENTS MALAYSIA OFFICIAL DISTRIBUTOR
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
KET0062 - KETT L-600 (REPLACE OLD LH-373/LE-373) STANDARD COATING THICKNESS TESTER (METER ONLY)-JAPAN | Flagship model of coating thickness tester Must be used with an optional probe (See "Applicable probe" column.) Automatic statistical calculations (Average, standard deviation, max and min value) Equipped with 4 measurement modes (Single / Free / Scan / Scan average) Expert model can be connected with Android app via Bluetooth® Specifications Measurement Method Electromagnetic induction or eddy-current *Depends on probe Applications Non-magnetic coating... | Paint coating thickness gauges(ultrasonic) |
|
|
|
TIM001-TT100SV2 DIGITAL ULTRASONIC THICKNESS GAUGE FOR METALLIC/NON-METALLIC MATERIALS-1.20MM - 225.0MM
|
The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces. | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM006A-5MHz 8mm Probe Transducer Sensor for Ultrasonic Thickness Gauge Meter
|
Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM001B-ENHANCED DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM
|
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT101A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (A-SCAN SNAPSHOT + THROUGH -PAINT FUNCTION)
|
Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT102A-ADVANCED GRAPHICAL ULTRASONIC THICKNESS GAUGE (Live Color A-Scan +Time-based B-Scan + Through -paint function)
|
*Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CYG001-CYGNUS DIVE WRIST-MOUNTED UNDER WATER ULTRASONIC THICKNESS GAUGE
|
With its bright, very large, AMOLED display the Cygnus DIVE is simple to operate, providing accurate and reliable thickness measurements, underwater. Depth rated to 300 metres. Available with data logging, topside, HelmetView™ and twin crystal probe options. MSI™ Measurement Stability Indicator - this is a feature exclusive to the Cygnus. When using the DIVE Gauge in Single Echo mode, MSI™ confirms when a reading is stable by turning the thickness measurement numbers from red to... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CYG002-CYGNUS 1 UNDERWATER ULTRASONIC THICKNESS GAUGE
|
The Cygnus Underwater is the original diver held subsea multiple echo Ultrasonic Thickness Gauge. It was designed for use by divers undertaking subsea maintenance and surveys 3 decades ago… and today it is still the industry standard. The unit is depth rated to 300 metres and it provides an accurate metal thickness measurement through coatings up to 20mm thick. The bright LED display ensures easy viewing even in poor visibility conditions. The Underwater Thickness Gauge is supplied ready to... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT109-HIGH PRECISION ULTRASONIC THICKNESS GAUGE(0.15mm – 20.0mm)
|
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS: Measuring Range (for steel) Interface-Echo Mode: (I-E or Standard Mode) 1.50mm – 20.0mm (0.059in – 0.787 in) Echo-Echo Mode: (E-E or High... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
CIA012-Basic Ultrasonic Thickness Gauge
|
Product Description Auto Calibration to assure the accuracy Auto linear compensation: this advanced software program enhances the precision by correcting the non-linear accuracy of transducer Use ▲ and ▼ keys to make a quick adjustment for the sound velocity/thickness and a quick recall to the stored data Coupling status indication: Observing the coupling icon to learn if the coupling is accomplished or not 10 thickness measurement storage and recall function available, which... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TIM001C-DIGITAL ULTRASONIC THICKNESS GAUGE FOR METAL/NON-METAL MATERIALS-0.75MM~225.0MM-W SOFTWARE | Features 1.Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2.Transducer models are available for special application, including for coarse grain material and high temperature applications. 3.Probe-Zero function, Sound-Veloctiy-Calibration function. 4.Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6.Battery... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
Thickness CalIbration/Reference Blocks (Carbon Steel/Stainless Steel) TIM001BA0101 TIM001BA0102 TIM001BA0201 TIM001BA0202
|
Model Descriptions Remarks TIM001BA0101 TIM001BA0101-1018 CARBON STEEL THICKNESS CALIBRATION BLOCK 5MM / 10MM / 15MM / 20MM / 25MM 1018 CARBON STEEL TIM001BA0102 TIM001BA0102-1018 CARBON STEEL THICKNESS CALIBRATION BLOCK 2.5MM / 5MM / 7.5MM / 10MM / 12.5MM 1018 CARBON STEEL TIM001BA0201 TIM001BA0201-304 STAINLESS STEEL THICKNESS CALIBRATION BLOCK 5MM / 10MM / 15MM / 20MM / 25MM 304 STAINLESS... | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
MTY006-MITUTOYO 547-301A THICKNESS GAUGE, 0MM - 10MM
|
Mitutoyo 547-301A Offers Accurately measure a variety of materials with this Mitutoyo 547-301 Digital Thickness Gauge. The tool features a flat anvil and is compatible with measurements up to 10 mm. Features Thickness range of 0 to 10 mm 0.01 mm resolution Flat anvil Mitutoyo 547-301A Specifications Range 0 to 10 mm Resolution 0.01 mm | Metal/Non-metal thickness gauges (ultrasonic) |
|
|
|
TMT114-CROSS HATCH CUTTER | Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working... | CROSS HATCH CUTTER |
|
|
|
PRO0021-6200V3 Graphic Power Clamp for 1-,3-phase (PF,Harmoncs,KWH) | Analysis for Single Phase and Balanced 3 phase system True RMS Value (V and I) Active Power (K,KW,MW,GW) Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR) Power Factor (PF), Phase Angle( Φ ) Energy (WH,KWH,KVARH,PFH) Programmable PT(1 to 3000)Ratios Display of Overlapped Voltage and Current Waveform Maximum Demand (MD in W,KW,MW) with programmable Period Harmonic Analysis (V and I) to 50th Order Display of 25 Harmonics in one screen Optical Isolated RS-232C... | Power clamps |
|
|
|
HIO0006-3286-20 POWER CLAMP METER | Functionality and Safety Packed into a Handheld Unit Use as a single-phase power meter Measure phase on a single-phase line Simple checking of three-phase lines Check power supply fluctuations For harmonic suppression External output of data to PC Printer output to 9442 (optional) | Power clamps |
|
|
|
LUT0366-Clamp power analyser 2000amps 600VAC SD logging (Same as Fluke 345)
|
The clamp power analyser is a very economical solution for the analysis of single phase or balanced 3 phase systems with voltages to 600VAC and current to 2000 amps. The product uses the same SD card logging. Readings are logged from every 2 second to 7200 seconds as instantaneous values. It also captures 3 types of transient events with programmable threshold. The display is graphical dot matrix and has many graphic formats including waveform on voltage and current - phasor... | Power clamps |
|
|
|
TEN810-Datalogging Large Wall Display Temperature /Humidity Monitor with 95dB Sound Alarm/Controller | Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity | Wall-display humidity meters |
|
|
|
CEN0017- Wall Display Hygro Thermometer (With Alarm) 31 | Large, easy-to-read dual LCD displays Humidity and Temperature. 3%RH humidity accuracy. Calibration available on site. Desk or wall mount. MAX/MIN value monitor. Audible and visual alarms, with adjustable set points, warns if limits are exceeded. 31 Hygro Thermometer (With Alarm) This is our proposed full time environmental monitoring system. Its detachable probe and can be verify or calibrated through optional signal extending... | Wall-display humidity meters |
|
|
|
TST0189/190 - Wall Display Thermo-Hygrometer with/without alarm with Resolution 0.1 deg.c | The accurate TST0189/190 alarm hygrometer reliably indicates when humidity and temperature limits have been exceeded, for example in garden centres, warehouses, cleanrooms, museums, laboratories etc. All the benefits of TST0189 High accuracy ±2 %RH (TST0190) TST0190 with LED alarm, warns if limits are exceeded Storage temperature -40 to +70 °C Operating temperature -10 to +70 °C Battery type 9V block battery Battery life 8736 h Weight 168 g Material/Housing ABS Probe... | Wall-display humidity meters |
|